Prostick 4348156478 3` Foot Fiberglass 1000 Watt - Black Cb Radio Antenna







Prostick 43237-2 2` Foot Fiberglass 1000 Watt - Black Cb Radio Antenna






- Exclusive VibraSorb Anti-breakage Design improves life of product
- Made in the USA
- Fiberglass Mast joined to Nickel Plated Brass Ferrule durable and quality materials to last longer
Francis 300-CB22B Black 3 Foot Hot Rod Cb Antenna Am






Prostick 2` Foot Fiberglass 1000 Watt - Black Cb Radio Antenna With Heavy Duty Stainless Steel Spring







- 1000 Watt Rating gives desired amount of power
- Exclusive VibraSorb Anti-breakage Design improves life of product
- Broad Tuning Range - 26.000 to 29.500 MHz
- Fiberglass Mast joined to Nickel Plated Brass Ferrule durable and quality materials to last longer
- Includes Heavy Duty Stainless Steel Antenna Spring
Cobra HGA 1500 Hga1500 36 Inch Magnetic Mount Cb Antenna Heavy Duty Magnet

- Built to outperform the competition - a non-abrasive heavy duty 4 inch magnet ensures that once the antenna is placed, it will stay there as long as you need it to
- The ultimate recreational magnet mount antenna - ideal for trucks, SUVs, and recreational vehicles this antenna will stay on when you need it, But is completely removable when not in use. Use the coax 15 feet of matched-braided Coaxial cable to attach to any CB or 10 meter radio RF Pl259 connector
- Works with all CB & 10 meter radios - 100 Watt rating with broad-banded frequency of 26-30mhz and weather channel ready
- Package weight - 1.0 lbs
Prostick 4 Foot Fiberglass 1000 Watt Black Cb Radio Antenna With Heavy Duty Stainless Steel Spring.









Roadpro RPPS-23KB Platinum Series Black 3 Foot 1000 Watt Dual Mirror Mount Cb Antenna Kit


- 16 Gauge Copper Wire for Handling 1000 Watts; AM/FM Ready | Optimized for Maximum Performance
- Computer Measured Copper Wire for Maximum Output and Reception
- Hermetically Sealed Coax Cable for Extra Protection
- 100 percent Non-Corrosive Clear Anodized Mounts with Stainless Steel Hardware
- Kit includes two 3 ft. black antennas, two mounts and 18 ft. coax cable
Luiton LT-CBA01 Cb Antenna 28 Inch 27 Mhz Cb Radio Antenna Full Kit






- LONG ANTENNA - Taller Antennas = Better Range! 28 Inch long for ultimate range & receiving!
- FULL KIT - includes magnet mount with pre-intalled 10ft of coaxial cable, coil load, and stainless steel whip.
- Magnetic base - Improve reception by harnessing large metal surfaces.
- Weather Channel Capable, Covers all CB frequencies.
- Warranty would be valid for 12 months against manufacturing defect.
Btech NAGOYA CB-72 High-Performance 28 Inch Cb Antenna Kit







- Effortless Setup for Beginners and Experts - The Nagoya CB-72 is designed with simplicity in mind, featuring an intuitive installation process that ensures a hassle-free setup. Whether you're new to CB radios or a seasoned enthusiast, this antenna makes installation straightforward, with a robust magnetic mount that secures your antenna quickly and effectively.
- Extended Reach with Premium Coaxial Cable - Enjoy the convenience of an extra-long 18' RG-58A/U coaxial cable included with the CB-72, providing ample length for versatile setup options. This premium cable ensures full CB frequency coverage with no tuning required, making it ready to use right out of the box.
- Optimized for Popular CB Radios - Achieve superior performance with the CB-72, ideally suited for leading CB radios like the Uniden PRO505XL, Bearcat 980SSB, Bearcat 880, and Cobra 19 DX IV. This antenna enhances your radio's capabilities, ensuring seamless compatibility and improved signal quality for clearer communications.
- Strong and Secure Magnetic Mount - The CB-72 features a 3.5-inch heavy-duty magnetic mount, designed for maximum stability and security. This robust mounting solution ensures your antenna remains firmly in place, providing optimal performance and minimal SWR for the best possible communication experience.
- Premium Materials for Durability and Performance - Constructed with a solid brass NMO mount and a satin finish, complemented by a gold plunger-type contact pin, the CB-72 is built for lasting durability and reliable performance. Trust in the quality of Nagoya's engineering to deliver an antenna that stands up to the demands of the road and harsh environments.
Wilson 305-550 Antennas 305550-5 T5000 Center Loaded Mobile Cb Antenna



Bingfu BFN00566 Cb Antenna 27Mhz Cb Radio Antenna Magnetic Base Handheld Cb Antenna Pl259 & Bnc Male Compatible









- Compatible with CB radios from many brands, improve quality and range to CB radio reception. The antenna design is portable, lightweight and durable, works on all channel within CB radio frequency range of 26MHz to 28 MHz.
- Heavy Duty Magnetic Mounting; Easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.
- Working Frequency - 27MHz; Max Input Power - 30W; Cable Type - 3m / 10 feet RG58/U Coaxial Cable; Antenna Height - 13 inch / 33cm; Weight - 480g;
- Cable Connector Type - PL-259 Male Connector; Accessoried with BNC Male to SO-239 Female Connector Adapter; Compatible with Mobile CB Radios and Handheld CB Radios;
- Package List - 1 x Antenna, 1 x Connector Adapter (As the Picture Shown);
Prostick Iebrt 5582652932 Prostick 4` Foot Fiberglass 1000 Watt - Black Cb Radio Antenna







Firestik FL3B Fl3-B Three Foot Firefly Antenna


Eifagur Long Range 27Mhz Magnetic Base Cb Radio Antenna With Pl-259 Bnc Male Connector For Mobile/Car Radio Cobra Midland Uniden Maxon President Vehicle Car Truck Mobile Handheld Cb Radio Shack







- Compatible with CB radios from many brand , improve quality and range to CB radio reception. The antenna works on all channel within CB radio frequency range of 26MHz to 28 MHzCenter 27MHz, No tuning needed
- Frequency Range - 26-28MHz (Center Frequency - 27MHz)MAX RF Power - 30WCable - 3M/10Ft RG-58UV.S.W.R - 1.2 - 1Impedance - 50 OhmAntenna Height - 13 inch / 33cm; Weight - 480g;
- Compatible withUniden PRO505XL or Bearcat 980SSB / 880, Cobra 19 DX IVCobra HH50WXST HH50 MRHH350FLT C75WXST HHRT50Midland - 75-822 75-785 MHS75;Uniden - BC75XLT PRO401HH PRO501HH BC125AT;Other UHF/BNC Connector 27MHZ radios suitable for this antenna
- Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception.
- Package List - 1 x Antenna kit, 1 x Adapter (As the Picture Shown);
- Don't worry about any problems, we have carefully checked each product, Any questions, please feel free to contact us, will reply within 24 hours;
Aries 30303 Cb Radio Antenna Single Groove Mirror Mount W/ So239 Stud







- CB RADIO ANTENNA SINGLE GROOVE MIRROR MOUNT W/ SO239 STUD - Aries 30303 - Bulk No package
- Stud is heavy duty - like K4A - See pictures.
Bingfu BFN00475 Cb Antenna 27Mhz Cb Radio Antenna Soft Whip Magnetic Base Cb Antenna Bnc & Pl259 Male Compatible









- Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz.
- Max Input Power - 30W; Frequency - 27MHz; Antenna Mounting Connector Type - BNC Male Connector; Length - 9.9 inch / 25cm; Weight - 420g;
- Feature - with Magnetic Base; Cable Type - RG58/U Coaxial Cable; Cable Length - 3m / 10 feet; Cable Connector Type - BNC Male Connector; Accessories - UHF PL-259 Male Connector Adapter;
- Package List - 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter (As the Picture Shown);
- Compatible with Handheld CB Radios - Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C;
Avd Prostick Fiberglass Cb Antenna With Single Groove Mirror Mount & Stainless Steel Spring








- The Fiberglass CB Antenna has a power rating of 1000 Watts which helps in the stable performance of the antenna. The cb antenna with mount is factory tuned at 26 29.5MHz.
- The antenna comes with an exclusive VibraSorb design which makes it difficult to break and increases the life of the product. Along with the aluminum mounts and heavy duty springs, its a highly durable product.
- The 1000 Watt antenna comes with a single groove mirror mount. The mount is made up of aluminum with SO-239 fitting. The mount for the fiberglass cb antenna is 3-way with single groove.
- The mirror mount included with the cb antenna is compatible with cables having PL-259 connectors. The aluminum mount works on all the antennas with standard 3/8 24 thread.
- This durable fiberglass cb antenna comes with heavy duty stainless steel springs. The upper and lower inserts are of chrome plated machine brass. The spring is made from top grade electro polished stainless steel and support the antenna upto 5 foot.
Firestik 4332975828 K-4A Cb Radio Antenna Heavy Duty So-239 Stud Mount






- FOR ANY 1/2 inch HOLE
- FITS ALL FIRESTIK ANTENNAS AND MOUNTS
- BULK ITEM. NO RETAIL PACKAGE
Generic Prostick 2` Foot Fiberglass 1000 Watt - White Cb Radio Antenna





