Flash Hobby 43223-1797 20 Pcs 2.4G Receiver Antenna 150Mm




- Length - 150mm
- Used on FrSky 2.4G Receiver, Futaba 2.4G Receiver
Weelye WEELYE-5 6 Pcs Universal Telescopic Short Metal Antenna For Remote Control Accessory, Children'S Electric Ride-Ons Rc Car Replacement Parts

Elechawk AN12P 12Pcs Plastic Protection Antenna Tube With Caps For Rc Cars Fpv Drone Receiver Antenna Frsky Xm+ X4R X4Rsb





- Include 12PCS plastic colorful tube, 12PCS black caps and 12PCS red caps
- The colorful plastic tube is durable and light-weight
- Suitable for Quadcopter, FPV Racing Drone receiver antenna
- Effectively protects the antenna from damage when crashing
- The tube with 2mm inner diameter and 150mm length is suitable for all receiver antenna
Hobbypark CA19-7239 Universal Soft Plastic Antenna Tube With Cap Black For Rc Car Fpv Drone Quadcopter Boats Airplane 2.4G Receiver Rx





- Not The Cheap Ones! NOT EASY BROKEN,Quality Plastic,Soft and Flexible.
- Compatible with Remote Control Car FPV Drone Quadcopter Boats Airplane,etc.Protects antenna wire from damage
- Material - Plastic Antenna; Rubber Cap
- Length - Approx - 11.8"(300mm); Outer diameter - Approx 0.12"(3mm) ; Inner Diamter - 0.08"(2mm)
- Pack of 5,Produced By HobbyPark ,Well made and durable,100% New
Usmile PATCH-1 Triple Feed High Gain Pagoda Patch Antenna 5.8G 9.4Dbi Directional Long Range Lhcp Rhcp Antenna For Rc Fpv Racing Skyzone 02S 03 Fpv Goggle Eachine Ev800D Ev200D Fatshark Hdo Hd3







- Good reception, good for drones and mid range flying, a great antenna to use with diversity
- Able to serve either as LHCP or RHCP antenna, never have to worry about wrong polarization
- Suit for fpv goggle such as Skyzone 02s Eachine EV800D EV200D EV100 VR006 FatShark HDO HD3 Aomway Commander
- Comes with a nice compact storage box
Arrma ARA390298 Antenna Pipe 160Mm, Ara390298

- ARRMA Antenna Pipe 160mm, ARA390298
Traxxas 2017 Transmitter Antenna


- Telescoping antenna
- For use with all Traxxas AM transmitters
- Replaces worn or damaged parts
Aediko AE14910 5Pcs Toy Telescopic Antenna 4 Sections Antenna For Remote Control Accessory Children'S Electric Ride On Toys Rc Car Replacement Parts





- 4 Sections Telescopic Antenna - Impedance - 75 ohm; Antenna Length - 13.5cm - 43.5cm (5.3 - 17 in); Connector - M3 Male
- High Quality - Telescopic Antenna Made of Stainless Steel and Brass,Great Antenna Replacement Part for Damaged TV and FM Radio Reception Antenna
- Easy to Install - Foldable Telescopic Antenna is Very Easy to Install , Plug and Play,Help You Get Better Signal
- Compatible with Indoor Portable Radio, FM Radio, Home Stereo Receiver, AV Audio video Home Theater Receiver, TV Converter Box, TV Tuner Receiver
- Compatible with Remote Control Accessory Children's Electric Ride on Toys RC Car, Wireless Security Sensor Motion Detector Alert, Remote Control Toy Model, Frequency Meter Counter
E-Outstanding SMSASFTR-5G8-F-B1 Black Super Mini Stubby 5.8Ghz 5Dbi Antenna Sma Female For Fpv Transmitter Tx Rx Rc Mak-Rhcp




- High quality materials - Long service life, easy to use.
- ABS material shell, light weight. Short and small, easy to install on UAV.
- SMA can be used as both transmitting antenna and receiving antenna. Compatible with other types of 5.8GHz RHCP antennas.
- It is widely used in FPV transmitter, TX, RX, RC, MAK-RHCP, UAV, etc.
- Bandwidth - 250 MHz. Input impedance - 50 ohms. 5. S.W.R - less than or equal to 1.5. Gain (dBi) - 3.0. Power capacity (W) - 50. Weight - 7g. Diameter - 17.5mm. Height - 22mm. Quantity - 1 PC.
Injora INA-97-5 15Cm Metal Antenna With Flag For Trx4M Scx24 Ax24 Fcx18 Fcx24 1/18 1/24 Rc Crawler Car









- Enhance your RC car's style with a 15cm antenna featuring an exclusive INJORA Logo Flag, making it stand out.
- Two mounting options ensure a hassle-free setup, allowing you to effortlessly customize your appearance.
- Crafted from durable metal, the antenna guarantees longevity and withstands the rigors of adventures.
- The set includes five Metal Antenna and ten INJORA Flags, providing a comprehensive solution for a personalized and appealing decoration.
- Scale antenna with a INJORA flag to show support for the brand!
Vbestlife VBESTLIFEGI9OWUTYX0-13 5.8Ghz 3Dbi Rhcp High Gain Antenna For Fpv Racing Drone Rc Parts Accessory Red









- 5.8Ghz FPV Antenna - High gain 3dBi RHCP directional antenna for FPV racing drone, made with quality material for strong and steady signal with anti-crash feature
- High Gain Antenna - Directional antenna with 5.8GHz frequency, 100MHz bandwidth, and 5325-5945MHz frequency for FPV drone transmitter receiver
- Omni-directional Antenna - Suitable for 5.8G drone transmitter receiver with high efficiency, providing 360-degree signal coverage
- Low Feeder Loss - 5.8Ghz 3dBi RHCP antenna with easy installation, can be bent at any angle while maintaining low feeder loss
- Product Specifications - Brand new, ABS material, vertical polarization type, input impedance of 50, VSWR of 1.5-2.5, power capacity of 50, optional connectors of angled MMCX, straight MMCX, and UFL, red color, and weight of 0.006kg
Micro Traders 596-EN 2Pcs M3 Thread 7 Sections Telescopic Antenna For Am Fm Radio, Rc Car







- Product Name - Telescopic Antenna; Sections - 7 Sections
- Unstretched Size - 137mm; Full Length - 730mm; Max Diameter - 6mm; Thread Diameter - M3
- Mainly used in remote control modelcar and remote control aircraft, radio, television, VCD, special configuration communications antenna and other electronics products.
- Replacement part for radio equipment, television, car antennas, phone antennas, and so on.
- Package includes 2 pieces of 7 sections telescopic antenna.
Flyfishrc 2Pcs 150Mm Osprey 5.8G-H-Z Lhcp Rp-Sma Antennas 2.82Dbi Fpv Hd Racing Drone Quad Rc Radio Antenna




- Wide bandwidth covering the popular FPV 5G-H-z band to ensure you have a clear and strong signal no matter which fre-qu-ency you're on
- The FlyFishRC LHCP 150mm antena is designed to be ultra-durable and put up with the beatings FPV pilots put on their antennas
- The outer shell case is made of high-quality polycarbonate material, and it is sealed shut to guard the antenna elements inside
- Though it is small and lightweight, will not sacrifice any performance
- 2pcs antennas only for your replacement. The others are not included
Huwaimi HUWAIMI1086 1/8-1/10 Rc Antenna With Us Flag Rc Car Parts Rc Decoration









Heyiarbeit DFC9800GP0831-FBA Rc Antenna Tube Black







- Parameters - Tube Inner Diameter - 1.5mm/0.06"; Outer Diameter - 3mm/0.12"; Length - 320mm/12.60"; Mount Inner Diameter - 3mm/0.12"; M6 thread; Product model - MV-TXZ; Material - Plastic Tube, Aluminum Alloy Mount;Color - Silver black
- Good Material - The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable; The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision
- Easy to Use - This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna; antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal
- Application - RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on
- Package Contents - 5 pcs x RC Antenna Mount +5pcs x Antenna Tube
Huwaimi HUWAIMI1086 1/8-1/10 Rc Antenna With Us Flag Rc Car Parts Rc Decoration









Ruiling RA2.4G-IPEX4-5.9-6 6-Pack 2.4G Receiver Antenna




- Package includes 6x 2.4G Receiver Antenna
- Made of high quality RF113 silver plated cable, high precision machining, low loss, stable signal, high sensitivity.
- Easy to install, no welding is required, plug and play.
- 5.9 inch standard length cable, great replacement antennas for Frsky, Futaba, JR, Hitec, Flysky, and Orange RX Receivers.
- Default antenna for X4R / X4RSB receiver, work with XM / XM + / RXSR / G-RX8 etc. receiver.
Venomrc VENOMRC330 1/8-1/10 Rc Antenna With Pirate Flag Rc Car Parts Rc Decoration









- Made of metal, be of high quality.with flag,the effect is more realistic and the car is more attractive
- Easy and convenient to install.The size of flag can be cut by yourself.Tools needed to install the flag - Glue, double-sided tape or paperclip.
- Exquisite workmanship, and high performance.
- Suit for 1 - 10 RC crawler Axial SCX10 90046 Traxxas TRX-4 TRX4 D90 D110 Tamiya CC01.and more 1/8 RC CAR.
- With Flag,A decoration to make your RC car more cool and attractive.
Injora INA-105 10Cm Decoration Antenna With Flag For 1/18 1/24 Rc Crawler Trx4M Scx24 Ascent18 Fcx18 Fcx24









- INJORA logo flag included, designed to make your RC car more eye-catching.
- Ensure easy installation on 1/18 and 1/24 RC crawlers.
- Made from durable nylon, the antenna measures 10cm (3.94 inches) in length.
- Includes four nylon antennas and four INJORA logo flags for customization.
- Perfect for TRX4M, SCX24, Ascent18, FCX18, and FCX24 RC crawler models.
Readytosky Mini 5.8G Fpv Antenna 2.8Dbi Rhcp Stubby Antenna For Fpv Racing Drone Quadcopeter Multicopter








