Livpow 10021 Rv Or Trailer Roof Vent







- Replaces Ventline, Jensen and Elixir vents or Compatible with a 1-1/4 inch to 2-1/4 inch Thick Roof,Fits Standard 14 inch x 14 inch Openings.
- One-piece Seamless frame is leak resistant and weather tight.
- Translucent white lid lets some light through.
- Roof vent allows fresh air to enter, and heat to escape, while trailer or RV remains locked and secure.
- Simple, hand-operated crank rotates to open and close dome and eliminates the need for wiring,Including mounting screws.
Heng’S Industries 71111A-C 14 Inch White Cargo Universal Roof Vent




- This Universal Vent Features a Strong Mesh Screen
- This Vent Includes the Garnish/Interior Trim
- Rough Cut-Out Opening Dimensions (This is the Hole You Will Need in Your Unit) - 14-1/2 inch x 14-1/2 inch
- Exterior Mounting Flange Dimensions (This is on the Top of Your Unit) - 16-1/2 inch x 16-1/2 inch
- This Vent Will Replace Existing Elixer or Ventline Vents
Luxlead CAP002 Rv Plumbing Vent Caps - Camper Vent Cap Replacement For Rv Trailer Camper Motorhome, Rv Roof Sewer Vent Cover Caps Kit






- The RV roof covers are made of high quality plastic material, UV resistant, durable to use.
- This RV roof vent cover expels sewer gas to prevent unpleasant odors from entering your RV's cabin through your plumbing. Vent mounts on top of your RV's ventilation pipe.
- Easy to install. 6 screw holes in the base for mounting, screw right on, make sure you have silicone caulking to seal all around it. Cap easily snaps onto the vent.
- Item dimension - ID 3.8", 5.3 inch diameter base, 3 inch tall, perfect fit for 1 inch to 2-3/8 inch diameter pipe.
- Package includes 2 packs white RV Plumbing Vent Caps. These work great to replace your campers worn out original vents.
Classacustoms 71111A-3G 14 Inch Non-Powered Rv Roof Vent




- Standard Universal RV Roof Vent (NON POWERED) w/ White Wedge Style Lid Heng's Industries Part # 71111A
- ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2 X 14 1/2
- MANUAL CRANK HANDLE to open lid - MESH SCREEN
- 3 inch Inner Garnish / Trim Ring Heng's Part #90092 - 3 inch Vertical Leg (How far up into your ceiling it goes) 1 Wide Mounting Flange (trim you see inside on the roof)
- EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2 X 16 1/2 - NO MOUNTING HARDWARE you must provide caulk/putty and screws ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching WARNING ****
Maxxair 00-933051 Maxx I+ Vent Cover - Translucent White






- SLEEK, UPDATED DESIGN - The Maxxair Maxx I+ Vent Cover features a sleek, updated design that not only enhances the aesthetic appeal of your RV but also ensures superior performance and durability for years to come.
- COMPATIBLE WITH MANY POPULAR 14 inch x 14 inch RV ROOF FANS - Designed to fit seamlessly with many popular 14 inch x 14 inch RV roof fans, the Maxx I+ Vent Cover offers versatility and compatibility, making it a perfect addition to any RV setup.
- ZERO-LEAK PROTECTION - With the Maxx I+ Vent Cover, you can rest easy knowing your RV is protected from leaks. This innovative cover ensures a zero-leak protection, safeguarding your interior from water damage and providing peace of mind.
- HASSLE-FREE INSTALLATION - Enjoy the convenience of a hassle-free installation. Designed for easy setup, this vent cover allows you to spend less time on installation and more time enjoying your RV adventures.
- BUILT BY THE INDUSTRY LEADER IN RV VENTILATION - Trust in the quality and reliability of a product built by the industry leader in RV ventilation - Maxxair. The Maxx I+ Vent Cover is constructed to withstand the elements, keeping rain and leaves out while allowing your fan to perform optimally.
Leisure Coachworks RV-ROOF VENT-PWR 14 Inch Rv Trailer Roof Vent Complete 12 Volt Fan W/White Lid And Interior Garnish








- Leisure Coachworks RV trailer power Roof vent complete. Removable Screen - strong, fine mesh screen with Radius Corner Design Manual Crank Style Handle
- 12 volt Motor - 6 inch Fan Blade - 12 volt ONLY 110/115/220 volt such as in a house or generator will damage the unit**
- On/Off Switch - Push Button Style (see photo)- Aerodynamic Wedge Shaped Dome
- Rough Cut-out Opening Dimensions (this is the hole you will need in your roof) 14 X 14 - Exterior Mounting Flange Dimensions (sits on the top of your unit) 16 X 16
- 1 OEM Inside Garnish Shroud Color White 13 inch x 13"....v
Camp'N VCWH1PC 14 Inch Universal Rv, Trailer, Camper, Motorhome Roof Vent Cover







- The Camp'N Replacement RV Roof Vent Cover is compatable with most popular roof vents. Compatable with Ventline roof vents prior to 2008 and Elixir roof vents starting 1994. Please reference the images in the listing to make sure your vent is compatable with this replacement.
- Each Camp'N RV vent cover replacement measures 14 inch x 14 inch
- Our Highly Durable rv ceiling vent covers are manufactured with impact resistant plastics for longlife.
- Easy to Install we know getting on the roof of your RV is intimidating so we've made it as easy as possible.
- Please checkout the Camp'N Amazon Storefront for additional replacement rv parts
Outprize RF-MANUAL-14IN Rv Roof Vent Fan, 12V 14 Inch Super Quiet Reliable Manual Rv Roof Fan






- 14x14 inch STANDARD SIZE - OUTPRIZE RV vent fan tight fits 14 inch RV's roof opening, also fits a MAX 14-1/2 inch opening not so tight. It will fit 1.9-7 inch thick rv roof, but you may need to trim down the garnish when your RV roof is about 1.9-6.1 inch thick
- MANUAL CONTROL - Compared with remote control ones, the manual control rv roof fan is more flexible, reliable, and cost-effective if you can easily reach your ceiling
- 3-SPEED OPTIONS - This reversible RV roof vent fan includes 2 extra 5A slow fuses. It offers adjustable speeds with 700-1300 CFM in air-in mode (LOW and HIGH), and 700-1300 CFM in air-out mode (Low, Medium, and High). You can operate it according to your needs with ease
- QUIET AND ENERGY SAVING - The 12V RV fan operates with exceptional quietness and energy efficiency, producing a maximum noise level of only 35dB and consuming a mere 18 watts of power when running in the high-power mode. Enjoy the peaceful and undisturbed environment within your RV
- Customer Service - OUTPRIZE prioritizes product quality and stands by our commitment to customer satisfaction. If you encounter any issues, we're here to help
Camco 40480 Rv Roof Vent Kit - Features Waterproof Design & Translucent Lid












- SUPERIOR VENT REPLACEMENT - Upgrade your RV's ventilation with this easy-to-install roof vent designed to replace Ventline, Jensen, and Elixir vents. Experience better airflow and a more comfortable travel experience!
- COMPATIBILITY - Designed to fit roofs between 1 1/4 inch to 2 1/4 inch thick, this RV vent assembly is built to withstand the wear and tear of the road. Its sturdy construction ensures long-lasting use for all your future travels.
- LEAK-PROOF PROTECTION - This trailer vent keeps your RV dry with its one-piece frame that effectively seals out wetness. No more worrying about leaks or dampness throughout your adventures!
- KEEPS OUT INSECTS - The built-in screen keeps insects out while still allowing fresh air to flow inch Enjoy a bug-free environment without sacrificing proper ventilation!
- UV-RESISTANT TRANSLUCENT LID - The specially designed translucent lid adds natural light to your living space while protecting you from harmful UV rays. Get this RV upgrade for a more comfortable travel experience!
Rvlovent 10SREMOTE Rv Roof Vent Fan 12V Auto Remote Control 14'' Inch 10 Speed






- 10 SPEED REMOTE CONTROL - Closes the lid and shuts off the fan when it gets wet. Powered-lift lid opens and closes automatically.
- Efficient and Powerful - This RV roof vent fan provides a fantastic air circulation for your Tralier. And it moves a lot of air but only use little power because of this special design motor.
- 1 pc of EXTRA Screen and 2pc of extra 5A slow fuse in the package.
- REVERSIBLE AIRFLOW - The roof vent can be used to intake fresh air in to your RV or exhaust hot air out of RV. The rv roof fan can be operated in Reverse/Forward mode. This RV roof vent fan available from Low 1-10 Max on forward/reverse direction.
- EASY-TO-INSTALL - Fits all rough 14 inch x 14 inch roof openings. Screws and white interior garnish included. Built in fuse for circuit protection.
Classacustoms 71111A-PS Class A Customs 14 Inch Non-Powered Rv Roof Vent




- Standard Universal RV Roof Vent (NON POWERED) w/ White Wedge Style Lid Heng's Industries Part # 71111A
- ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your roof) 14 1/2 X 14 1/2
- MANUAL CRANK HANDLE to open lid - MESH SCREEN
- 1 inch Inner Garnish / Trim Ring Heng's Part #90090 - 1 inch Vertical Leg (How far up into your ceiling it goes) 1 Wide Mounting Flange (trim you see inside on the roof) - MOUNTING HARDWARE INCLUDED 70 inch Putty tape - 28 Pan Head Screws #8 x 1"s
- EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 16 1/2 X 16 1/2 ****WARNING All Vent Metal Flanges are VERY SHARP use caution when touching WARNING ****
Dometic 3311236 Polar White Plastic Vent Roof

Rvmate 14 Inch Rv Roof Vent Fan For Rv/Camper/Trailer






- This RV roof vent fan provides a fantastic air circulation for RV, trailer, camper and other vehicles, and helps to lower indoor temperature & eliminating smell from food, smoke, waste, pets, etc. It is a great choice to replace your old cracked roof vent whose size is 14 inch x 14".
- The RV roof vent is made of durable plastic material, which is UV-resistant and waterproof. The Putty tape helps to seal the frame into your RV roof perfectly and prevent the rainwater in, and screen will prevent leaves inch
- Equipped with 12V RV motor 6 inch blades which can save your time of picking and installing.
- Easy to install, insert vent in rough opening on top of putty tape, use an awl or nail to locate and line up corner drilled holes with the corner screw holes in vent frame.
- Package Includes 12V RV roof vent fan *1, putty tape *1 and manual handle *2.
Cicony 694774251272 Rv Roof Mushroom Vent W/Water Guard Used

- IT FROM XUQCAH MATERIAL AND FOIMOJSK PARTMENT AND Thurder LOVER
Starvent A021C Rv Roof Vent Fan 6-Speed-Reversible






- UNIVERSAL RV VENTILATION SYSTEM - The Starvent Roof Vent and Fan allows for airflow within your motorhome, letting out smoke, moisture, and odors and cooling your space. Compatible with a 1.16 5.5 roof, it fits standard 14x14 ceiling openings
- 6-SPEEDS - The 12 volt variable-speed fan has six settings to boost or reduce airflow as needed with a reversible blade rotation to either pull air in or push it out
- IMPROVED DESIGN - This exhaust system keeps your camper fresh and bright with transparent fan blades that bring sunlight in and a smoke-colored dome that filters out sun's. It is easy to open and close the dome and includes a removable screen easy for cleaning or maintenance
- LOW NOISE LEVEL - The Starvent trailer exhaust fan and vent is powerful and quiet, unlike other RV fan motors. It slowly ramps up to speed and down, so theres no sudden jolt of sound when starting and stopping
- EASY TO INSTALL - The intuitive 2-wire design and included white interior trim and screws make installation clean, simple, and quick
Classacustoms Heng'S 71111A-C Rv Roof Vent White Wegde Lid Non Powered Manual Crank Lid With Built In Screen And Galvanized Frame









Leisure Coachworks ROOFVWHT-2PAK 2 Packs 14 Inch Rv Roof Vent Cover Universal Replacement Vent Lid Smoked






- Leisure Coachworks Smoked Vent Lid 2-pack - Advanced Design - Low-profile aerodynamic design offers high-flow ventilation
- Sturdy Construction - Sturdy construction & One long continuous hinge for fully adjustment
- High Quality - High-density UV-resistant polyethylene and rust-resistant hardware for years of rugged use
- 14 inch vent cover. Actual Size is 15 inch x 15 inch x 2 inch - (1 year warranty and friendly customer service)
- Easy Installation - With accessories pre-assembled for easy installation and operation. Easy-to-install Zero-Leak mounting system lets you avoid drilling holes into your roof's surface
Aussio 2 Pack, White) Rv Roof Vent Cover Kits With Putty Tape And Screws Camper Vent Cap For Rv Trailer Rv Roof Vent Cover Replacement Rv Plumbing Vent Caps Kit For 1 Inch To 2-3/8 Inch Od Pipe






- Durable Material - Crafted from high-quality plastic material, these RV Roof Covers are UV-resistant and built for long-lasting use, ensuring durability in various weather conditions.
- Perfect Dimensions - With dimensions of ID 3.8", a 5.3 inch diameter base, and standing 3 inch tall, these vent caps are an ideal fit for pipes ranging from 1 inch to 2-3/8 inch in diameter, ensuring a perfect and secure match.
- Effective Odor Prevention - The roof vent is designed to expel sewer gas, preventing unpleasant odors from entering your RV through the plumbing. It securely mounts on top of your RV's ventilation pipe for efficient odor control.
- Simple Installation - Featuring six screw holes in the base for easy mounting, these covers can be quickly installed by screwing them on. Be sure to use silicone caulking to seal all around for added protection. The cap effortlessly snaps onto the vent, streamlining the installation process.
- Comprehensive Package - Each package includes 2 RV Plumbing Vent Caps, complete with 2 putty tape and 12 screws. These caps are perfect replacements for worn-out original vents, offering a hassle-free solution to maintain the integrity of your RV plumbing system.
Generic ASLT-RV002 Jack Boss 2 Pack Set Roof Vent Cover, 14 Inch Replacement Vent Lid For Inside Rv Trailer Camper Motorhome







- DIMENSIONS - Measures 14 x 14 x 3.25 inches. It comes with screws x 13, nuts x 13, a mini wrench and a mini screwdriver.
- WIDE APPLICATIONS - It is compatible with universal RV, camper, trailer, motorhome roof vent, also applicable for Ventline previous of 2008 and Elixir vents starting from 1994.
- DURABILITY - Made with high-quality UV-resistant polypropylene, our RV vent covers have an extended lifespan. With a reinforced center support beam and a long continuous hinge for fully adjustment, making the RV roof vent cover has good stable durability.
- LOW PROFILE - Offering high-flow ventilation, keeping fresh air circulating in your RV. It is supposed to make comfortable experience and enjoyment in your driving.
- NO-WORRY GUARANTEE - Each cover has been rigorously tested to ensure the safety. If you have any question, please feel free to contact us.
Camco 40433 Rv Roof Vent Cover | Allows High Flow Air Ventilation Into Your Rv






- Allows Fresh Air Ventilation and Light - Allows you to leave the vent open rain or shine
- Easy to Clean - Features removable louvers for easy cleaning; Includes built-in insect screen
- Aerodynamic Design - Aerodynamic styling offers high flow ventilation with a design that allows you to keep it open when its raining, or even when youre traveling
- UV Stabilized Construction - UV stabilized resin for years of rugged use
- Hardware Included - Mounting hardware included; Mounts to existing 14 x 14 roof vents
- Fit type - Universal Fit