1
Editor's Choice
Freud 63-100 9/16 Inch Depth Slotting Cutter Set
FREUDBrand
63-100Model
1.0H*1.0L*1.0W inchesDimension
0.18 lbWeight
Ranked #15 in Best Three Wing Slotting Cutters Of 2024
9.8We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
FreeShipping
Visit Store » Amazon.com ( 4.68 / 5 )
Features
2
Editor's Choice
Yonico 12101Q Router Bits Slotting Cutter 1/16-Inch 1/4-Inch Shank 12101Q
YONICOBrand
12101qModel
9.7We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
Save 34%
Visit Store » PrecisionBits ( 4.85 / 5 )
Features
- This slotting cutter router bit assembly cuts 1/16 inch thick x 9/16 inch deep slots. Comes complete with 1/4 inch shank/arbor and bearing, washers and nut.
- Cut slots for joinery and other standard applications
- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
- Silver induction brazing for maximum strength and durability
3
Editor's Choice
Yonico 14081Q Slot Cutter Router Bit 1/8-Inch Height X 3/8-Inch Depth 1/4-Inch Shank 14081Q
YONICOBrand
14081qModel
0.49H*2.12L*1.25W inchesDimension
0.06 lbWeight
9.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
FreeShipping
Visit Store » PrecisionBits ( 4.85 / 5 )
Features
- This slotting bit has a cutting depth of 3/8 inch and a cutting thickness of 1/8". The overall length is 2-1/8 inch with a 1/4 inch shank.
- Cut slots and grooves for joinery and other general use
- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
- For use on table mount and handheld router
- Silver induction brazing for maximum strength and durability
4
Xdengp 3FCKD-1/2*2*3/16 Slot Cutter Router Bit 1/2 Shank
XDENGPBrand
3FCKD-1/2*2*3/16Model
1.0H*1.0L*1.0W inchesDimension
9.2We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
FreeShipping
Visit Store » XDENGP ( 4.95 / 5 )
Features
- Precision and Efficiency - Carbide Height 3/16", Overall Dia - 2", Shank Dia - 1/2". Suitable for table-mounted routers and other automatic routers as well as hand-held. Ensures precise and smooth T-Molding Slot Cutting, allowing for flawless finishing touches on your woodwork. An essential tool for carpenters and DIY enthusiasts
- Safety - XDENGP's slotting router bit is equipped with anti-kickback design that ensure enhanced steadiness and reduced trembling. It is essential to securely fasten the router bit to the"min insert" line and keeping the RPM 14000. Pushing slow can help you get a smoother and cleaner cut
- Durable - High-quality C3 micro-grain tungsten carbide blades and strong wear resistance of the slot cutting bit offers exceptional strength, longevity, and resistance to wear, ensuring consistent performance and reliability
- Widely Used - The router biscuit cutter is suitable for wood, MDF, plywood, compact panels, acrylic and particleboard. Pls do not cut metal and non-wood materials like steel, iron, sand, etc
- Customer-Centric Service - We prioritize customer satisfaction and offer a reliable after-sales. If you encounter any issues or have questions regarding our products, please don't hesitate to contact us. Enjoy woodworking with confidence
5
Freud 56-100 9/16 Inch Depth X 1/16 Inch Slot Three Wing Slotting Cutter
FREUDBrand
56-100Model
1.0H*1.0L*1.0W inchesDimension
0.08 lbWeight
9.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
Save 48% + FreeShipping
Visit Store » Amazon.com ( 4.68 / 5 )
Features
6
Yonico 14082 Slotting Cutter Router Bit 1/8-Inch 1/2-Inch Shank 14082
YONICOBrand
14082Model
9.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$
FreeShipping
Visit Store » PrecisionBits ( 4.85 / 5 )
Features
- This slotting cutter router bit assembly cuts 1/8 inch thick x 33/64 inch deep slots. Comes complete with 1/2 inch shank/arbor and bearing, washers and nut.
- Cut slots for joinery and other standard applications
- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
- Silver induction brazing for maximum strength and durability
7
Whiteside A200B Router Bits A200B Slotting Cutter
WHITESIDEBrand
A200BModel
5.5H*2.0L*3.0W inchesDimension
0.1 lbWeight
9.0We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
- A200B
- Slotting Cutter Arbor
- Industrial Quality
8
Whiteside 6700A Slotting Cutter 1-7/8Cd 1/16Cl 5/16Bore 3Wing
WHITESIDEBrand
6700AModel
5.0H*4.0L*1.0W inchesDimension
Ranked #5 in Best Three Wing Slotting Cutters Of 2024
8.9We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
9
Whiteside A210B Router Bits A210B Slotting Cutter
WHITESIDEBrand
A210BModel
5.5H*2.0L*3.0W inchesDimension
0.0 lbWeight
8.7We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
- Whiteside Router Bits are made with Premium Carbide
- Precision ground for proper balance at high RPM
- Industrial Quality
10
Amana Tool 53206 Slotting Cutter 3 Wing X 1-7/8 Dia X 1/8 X 5/16 Inner Dia
AMANA TOOLBrand
53206Model
0.0 lbWeight
Ranked #2 in Best Three Wing Slotting Cutters Of 2024
8.5We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
11
Freud 58-100 9/16 Inch Depth X 1/16 Inch Slot Four Wing Slotting Cutter
FREUDBrand
58-100Model
1.0H*1.0L*1.0W inchesDimension
0.07 lbWeight
8.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
Save 5% + FreeShipping
Visit Store » Vera Tools ( 4.78 / 5 )
Features
12
Komsepor Foam Cutter With Slotting/Groove Electric Hot Knife Styrofoam Cutter Foam Cutting Tool Air Cooled Hot Knife Foam Cutter 200W 110-120V (5 Blades) For Epp
KOMSEPORBrand
3.94H*13.58L*9.45W inchesDimension
Ranked #6 in Best Hot Wire Foam Cutters Of 2024
8.3We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$$
Save 25% + FreeShipping
Visit Store » KOMSEPOR ( 4.81 / 5 )
Features
- Wide Application Range - The hot knife foam cutter is commonly used and can cut various materials, including lightweight foam, KT board, EPS,XPS, styrofoam, polyester foam, sponge, rubber, and etc. Our products undergo performance testing before leaving the factory to ensure quality, so there may be usage marks on the blades, which is normal
- Efficiency & Air Cooling - The foam cutter is 200W which can heat up quickly and cuts smoothly. You can easily adjust the temperature and power using a knob on top of foam cutting tool. Air cooling part can ensure that it does not stop working due to excessive temperature, and keep electronic components in good condition, as well as improving work efficiency
- Safety & Use Notice - The foam board cutter has a durable blade that can withstand high temperatures, and a safety electronic micro-switch to avoid accidents. It's best to take breaks to prevent overheating for over 6 minuets. Recommended for use in ventilated areas
- 4 BLADES & ACCESSORIES - Our foam cutter electric styrofoam cutting tool provides four blades(62; 82), while other brands have only three at most, which can be used by customers for a long time. In addition, there is also an additional copper brush and a nylon sticker which better store the wires
- SLOTTING / GROOVE - The slotted blade can be folded to the size and width of the desired groove, with a maximum width of 16cm and a maximum width of 3.5cm. There is also a guiding ruler which can install into the groove plate When using, it is recommended to start from the lowest gear and slowly adjust to the appropriate gear.
- Customer First - Komsepor are committed to providing you with the best customer support. Once any product defects are found, you can immediately contact us who will provide you a satifying solution, which can also improve our product and provide customers with a better user experience
13
Wsoox FBA-YH-WY437-4-US Slot Router Bits With 1/4 Inch Shank 5Pcs Slotting Cutter Router Bit Set Cutting Heigh:5/64",3/32",1/8",3/16",1/4".
WSOOXBrand
FBA-YH-WY437-4-USModel
8.2We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
FreeShipping
Visit Store » WSOOX ( 4.81 / 5 )
Features
- Router Bit Size - - 5 pcs T slot cutter router bit with 1/4 inch shank; cutting height for 5/64",3/32",1/8",3/16",1/4"; cutting depth is 1/2".
- Quality Blade - - The blade is made of high-quality YG8 carbide steel, which is sharp, durable and impact resistance. It can cut the wood smoothly and not easily broken.
- Teflon Coating - - Baking heat-resistant coating to prevent accumulation of wood chips, resin and asphalt, good wear resistance and long service life.
- Applicable Material - - This professional T track router bit set is suitable for wood, MDF, particle board, plywood, acrylic and different wood composites.
- Compatible Machines - - Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Please Note - the short clamping of this router bit might cause bend.
14
Akylin US-AKRB0514GZTXD 5Pcs T Slot Router Bit Set,1/4 Inch Shank,Cutting Height 1/8 Inch,5/32 Inch,3/16 Inch,1/4 Inch And 5/8 Inch,3/8 Inch Deep T Trark Bit With Bearing,T-Slotting Cutter
AKYLINBrand
US-AKRB0514GZTXDModel
8.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
FreeShipping
Visit Store » Akylin Store ( 4.91 / 5 )
Features
- Akylin T-Slotting Cutter Set, 1/4 inch shank,cutting height 1/8 inch,5/32 inch,3/16 inch,1/4 inch and 5/8 inch,1-1/4 inch cutting diameter to create 3/8"-deep slots and grooves. Application - Producing T slots and grooves in any wood,especially perfect for plywood
- Ball bearing T trark bits build T-moldings, spline joints, tongue & groove joints, and other applications. A 1/2 inch diameter bearing is supplied with every cutter,depth of cut can be changed by purchasing alternative bearing sizes.
- Tungsten carbide-K10 original carbide tipped,with minimal wear and longer life.Silver induction brazing for maximum strength and durability.Heat resistant coating will provide the router bits with superior wear resistance and Rust and corrosion prevention
- 1/4 inch shank made by solid steel,lower vibration for the bigger cutter and added stability.Bearing guide ensures perfect guidance and smooth running,reduce trimming mishaps,largely reduces chipping
- To rout hardwood, softwood, plywood or composites.Use in hand-held, table-mounted.MAX RPM 16 000
15
Yonico 14914Q Top Bearing Slot Cutter Router Bit 1/8-Inch X 5/16-Inch 1/4-Inch Shank 14914Q
YONICOBrand
14914qModel
0.49H*1.87L*1.25W inchesDimension
0.06 lbWeight
8.0We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $
Visit Store » PrecisionBits ( 4.85 / 5 )
Features
- This top bearing slot cutter router bit routes a 1/8 inch x 5/16 inch slot. The overall diameter is 1-1/4 inch and 1/4 inch shank.
- Cut slots and grooves for joinery and other general use
- Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge
- For use on table mount and handheld router
- Silver induction brazing for maximum strength and durability
16
Whiteside 6710A Router Bits 6710A Slotting Cutter
WHITESIDEBrand
6710AModel
4.5H*4.0L*4.0W inchesDimension
0.06 lbWeight
8.0We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $$
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
- 6710A
- Slotting Cutter
- Industrial Quality
17
Whiteside 6708A Router Bits 6708A Slotting Cutter
WHITESIDEBrand
6708AModel
4.5H*4.0L*4.0W inchesDimension
0.06 lbWeight
7.9We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $$
FreeShipping
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
- 6708A
- Slotting Cutter
- Industrial Quality
18
Freud 60-102 Slotting Cutter Arbor
FREUDBrand
60-102Model
1.65H*4.9L*1.65W inchesDimension
0.14 lbWeight
7.8We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $
Save 15%
Visit Store » Routerbitworld ( 4.88 / 5 )
Features
19
Wolfride 221202GY0575 Slot Cutter Router Bit 1/4 Inch Shank Slot Cutting Bit Slotting Cutter Router Bit
WOLFRIDEBrand
221202GY0575Model
1.54H*3.74L*2.24W inchesDimension
0.02 lbWeight
7.6We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $
Save 9% + FreeShipping
Visit Store » Wolfride Online ( 4.83 / 5 )
Features
- Slot cutter router bit routes a 1/4 inch x 1/4 inch slot, 1-1/4 inch Cutting Diameter.
- Blade Material - YG8 carbide; Body Material - 45# carbon steel.
- For edge trim or making grooves, stable and efficient.
- For use on table mounted and handheld routers.
- Cuts composition materials, plywood, hardwood and softwood.
20
Freud 60-120 Slotting Cutter Arbor
FREUDBrand
60-120Model
1.5H*4.5L*3.2W inchesDimension
7.6We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Good
Price: $
Save 9%
Visit Store » ToolDepot247 ( 4.32 / 5 )
Features