Spectra Precision LL300N-1 Laser Level, Self Leveling Kit










- Increases Productivity With Faster Setups, Fewer Mechanical Parts, And Automatic Self-Leveling
- Easy, One-Button Operation Requires Minimal Training For Using Tool
- Complete Leveling Crew With Tripod In One Portable Hard Shelled Carrying Case
- Rugged Design With Hard Hat Rotary Protection Provides Superior Drop And Outdoor Weather Protection (Ip66)
Spectra Precision LL100N-2 Laser Level Kit With Hr320 Receiver And Clamp










- Complete leveling crew in a case includes the LL100 laser transmitter, HR320 receiver, C59 rod clamp, 15 ft grade rod in inches, adjustable tripod, system case, alkaline batteries and user guides
- Fully automatic, self-leveling offers easy, one-button operation requiring minimal training for quick setups
- Height of Instrument alert stops the laser from rotating when jarred or knocked to avoid erroneous readings
- Rugged design provides superior drop and outdoor weather protection resulting in reduced downtime
- HR320 receiver is waterproof and dustproof and easy to use; it stands up to tough job site conditions
Spectra Precision LL500 Self-Leveling Laser Level








- The kit includes with LL500 laser transmitter, HL700 digital readout receiver, C70 rod clamp, alkaline batteries, hard-shell storage case, and user guides
- "Self-leveling with built-in out-of-level shut off maintains accuracy over the entire work area and minimizes errors"
- High accuracy laser, 1/16 in per 100 ft (1.5 mm per 30 m) with temperature compensation provides highly stable, repeatable accuracy even under large temperature changes
- "Long range 1,650 ft (500 m) working diameter increases productivity by reducing need for multiple set-ups on a large job site"
- Included HL700 receiver, which can be used in rod mounted or handheld position, features a digital readout of elevation that provides a numeric display of +/-2 inches, displayed on large front and rear LCDs
Spectra Precision CR700 Combination Laser Receiver







- Machine mounted display receiver can be used on small grading and excavating equipment, as well as a traditional laser receiver mounted to a grade rod; Kit includes C70 Grade Rod Clamp, C71 Magnetic Mount, 3x AA Alkaline Batteries, and User Guide
- Patented laser reception technology provides more accurate and more consistent readings than traditional methods and has fewer electronic components resulting in the most rugged, accurate and reliable laser receivers available
- Red, green, blue LED arrows are super bright and visible at long range and in all dark or low light conditions
- Six levels of sensitivity (accuracy) offer maximum flexibility to meet jobsite requirements, from rough grading to fine grade checking. Digital readout provides the exact distance from on-grade numerically and has a working radius of 1500 ft (460 m)
- Ideal for entry-level machine grade display, specifically on mini-excavators and backhoes. Provides instant grade information to the operator and eliminates the need for a rod man in the trench.
Spectra Precision LT52G Multi-Purpose Laser Tool With Green Beam Cross Lines And 5 Alignment Points, Automatic Self-Leveling







- Eliminates the need for contractors to purchase two tools by combining a 5-beam pointer and a crossline laser into one product. Automatic self-leveling assures accuracy and fast setup
- Green beam crosslines are best for use in bright ambient light conditions and points are visible up to 200 ft (60 m)
- Durable housing is designed to protect the unit and endure the rigors of any construction site; comes with a hard-shell case for convenient transport and storage
- Use for all interior building and remodeling horizontal and vertical alignments - wall layout, point transfer up and down, tiles, finish carpentry, and 90 degree squaring
- Includes powerful Lithium-Ion rechargeable batteries providing all day operation and eliminates need for alkaline batteries
Spectra Precision LL300N-2 Laser Level - With Hl450 Receiver








- Class 2 Laser and <3.4mW (less than 3.4 Milliwatts)
Spectra Precision GL412 N Single Grade Laser Level


- Laser package includes a GL412N Single Grade Laser, RC402N Radio Remote Control, HL760 Digital Readout Laser Receiver, C70 Clamp, 105516 Vertical Adapter for HL Receiver, NiMH Rechargeable Batteries, Charger, and Carrying Case
- Automatic, self-leveling single grade laser is the most rugged, cost-effective laser that does three jobslevel, grade, and vertical alignment
- The HL760 digital readout receiver provides automatic Grade Match that allows measurement of unknown grade values between two points over unknown ground and eliminates time-consuming slope calculations.
- An easy-to-use, menu-driven interface reduces learning time and eliminates complex button pressing to activate advanced features. Height of Instrument Alert stops the laser from rotating when jarred to avoid erroneous readings.
- Maintains performance in rainy, dusty, and other harsh jobsite and weather conditions; Durable design is built to withstand accidental drops and tripod tip-overs
- RC402N radio remote control allows control of all laser functions from up to 330 ft (100 m) away
Spectra Precision GL422N Dual Grade Laser Level


- Laser tool kit includes a GL422N Grade Laser, HL760 Laser Receiver, C70 Adapter, 105516 Vertical Adapter for HL Receiver, RC402N Radio Remote Control, NiMH Rechargeable Batteries, charger, and carrying case
- Automatic, self-leveling GL422N dual grade laser is the most rugged, cost-effective laser that does 3 jobslevel, grade, and vertical alignment
- Automatic Grade Match eliminates time-consuming and error-prone calculation
- An easy-to-use, menu-driven interface reduces learning time and eliminates complex button pressing to activate advanced features
- Maintains performance in rainy, dusty, and other harsh jobsite and weather conditions; Durable design is built to withstand accidental drops and tripod tip-overs
- RC402N radio remote control allows control of all laser functions from up to 330 ft (100 m) away
Spectra Precision HR320 Laser Receiver With C59 Rod Clamp






- HR320 laser receiver has a 5 channel LCD directional arrows on the front and back and two on-grade sensitivity settings
- Two on-grade sensitivity settings - fine and coarse - meet various jobsite requirements
- Includes a C59 rod clamp with a snap-in feature for quick switching between rod mounted and handheld job applications. The on-grade position aligns with the top edge of the clamp.
- Loud 100 decibel speaker is designed to be heard on noisy construction sites and has three adjustable speaker levels - loud, low, and off
- Receivers housing and battery compartment are IP67 waterproof, protected against moisture and dust, and tool withstands drops up to 5 ft (1.5 m)
Spectra Precision LP51G Laser Pointer, 5 High Visibility Green Beam Points, Vertical, Horizontal And Plumb, 90 Degree Layout, Automatic Self-Leveling






- Projects 5 high-visibility green points - one point up, one down, and three horizontal points 90 degrees to each other can be seen in brighter ambient conditions
- Designed to handle interior construction applications, including one-person installation of walls, doors, ceiling tracks, and other overhead fixtures without the need for a plumb-bob
- Automatic self-leveling assures accuracy and fast setup
- Compensator lock used for non-level applications and secure transport
- Rugged laser layout tool offers several benefits to general and interior contractors, electricians, plumbers, and a variety of tradesmen
- Included magnetic mount accessory allows easy alignment over a point for fast point transfer and secure positioning on steel studs and floor track
Spectra Precision HL450 Laserometer Laser Receiver






- Digital Readout of Elevation allows faster readings by displaying the exact numerical distance from grade, eliminating the need to move the receiver to get to incheson-grade inches
- Anti-Strobe Sensor stops construction strobe lights from setting off the receiver and eliminates phantom strikes for easier identification of true laser beam signals
- Large reception height allows faster readings by acquiring the beam quickly, and makes it easier to stay in the beam
- Durable in tough environments provides less downtime due to damage or service requirements after accidental drops
- Highly versatile digital laser receiver
Spectra Precision GL622N Dual-Slope Grade Laser Level Kit







- The GL622N pro Laser Level tool kit comes with a HL760 Laser meter, C70 rod clamp, RC602 remote control, and is rechargeable with its 10 Ah NiMH batteries and included charger
- Automatic self-leveling rotary laser serves as a detector for measuring fast, easy horizontal level, grade and vertical plumb setup, with a large compensated grade range from 25%
- Whether you are cutting title, concrete or any other construction or welder job, get it right with the first cut, thanks to its temperature and grade measurement, and cross axis compensation
- Digital Grade Match measures and displays the existing grade over unknown ground and eliminates time consuming and error prone calculations
- HL760 digital receiver with clamp provides readout of elevation, exact distance from grade displayed, and anti-strobe sensor to prevent false reading from jobsite strobe lights
- Full-function radio remote control offers advanced digital features like Grade Match, PlaneLok, and Automatic Axis Alignment, and has an intuitive graphic display
Spectra Precision FBA_LL300N-8 New! Trimble Spectra Precision Ll300 Self-Leveling Rotary Laser Level







Spectra Precision C70 Laser Level Clamp For Hl700


- Adapter for receiver with bubble vial
Spectra Precision LT58G Green Laser Level Tool




- Features ultra-bright green laser technology, providing the industrys brightest 360-degree lines for easy viewing in all conditions
- Ideal laser level to use for ceiling work and other applications including interior wall layout, point transfer, mechanical, electrical and plumbing layout and alignment, tile layout, and finish carpentry
- The tool's durable housing is designed to withstand the rigors of professional construction environments
- The LT58G is compact, lightweight and easy to mount; Laser Class 2 with laser output < 1mw and laser wavelength 520Nm
- Comes with a powerful, rechargeable Lithium-Ion battery that provides up to 25 hours of green beam operation, and saves on battery costs compared to alkaline models
- Allows you to complete installations on high ceiling grids quicker and easier, compared to using conventional, heavy, rotating lasers and cumbersome mounts
Spectra Precision LL300S Laser Level Package








- Class 2 Laser and <3.4mW (less than 3.4 Milliwatts)
Spectra Precision HL760 Laser Level Receiver


- Features an LCD backlight so the digital readout and other receiver information is visible in low light and dark conditions; Large front and rear LCDs show exactly how far the elevation is from on-grade for fast and easy cut/fill readings
- Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity; Select units of measure from mm, cm, ft, in, or fractional inches
- A new function called "Fingerprinting links the receiver with a particular laser; Once paired with the laser transmitter, the receiver can filter out other lasers that strike it and only accept the laser that it is paired with
- Receiver is designed to survive tough construction site conditions, is waterproof, and can withstand a drop of 3 meters onto concrete
- No need to go on-grade to measure; Reduces rework by allowing remote monitoring
- Anti-strobe sensor prevents false readings from site strobe lights
Spectra LL300S-4 Laser Level Package




- Class 2 Laser and <3.4mW (less than 3.4 Milliwatts)
Topcon 1021200-07 Rl-H5A Self Leveling Horizontal Rotary Laser







- MULTI-PURPOSE LASER - Grading, excavating and general construction projects are perfect applications for the RL-H5A. With the IP66 rating, the RL-H5A is "job site tough" and can withstand dust, a sudden shower and even torrential rainfall.
- EASY TO USE - With electronic self-leveling, you press the power button and go right to work in seconds. If the RL-H5A gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to 10 arc seconds.
- LONG RANGE WITH HIGH ACCURACY - Need to shoot elevations up to 800 m from your laser? No problem - this instrument has the power and range to cover a 800 m diameter job site.
- KIT COMPONENTS - includes the RL-H5A laser and LS-80 Receiver, Sensor holder and Carry case.
Spectra Precision HL700 Digital Readout Receiver










