1
Editor's Choice
S&F Stead & Fast ZXT-HAZ-002 Annular Cutter Set 13 Pcs
S&F STEAD & FASTBrand
ZXT-HAZ-002Model
3.15 lbWeight
9.9We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
FreeShipping
Visit Store » S&F Merchants ( 4.87 / 5 )
Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- 11 HSS core drill bit cutting tool assortment set with Outside Diameter in inches - 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16",1 inch cutting depth for each drill cutter
- CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution - if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack
- Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench
2
Editor's Choice
S&F Stead & Fast ZXT-HAZ-030 Annular Cutter Set, 2 Inch Depth Of Cut
S&F STEAD & FASTBrand
ZXT-HAZ-030Model
9.7We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
FreeShipping
Visit Store » S&F Merchants ( 4.87 / 5 )
Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- Six HSS angular cutter bits with outside diameter in inches - 7/8, 1-1/8, 1-1/4, 1-1/2, 1-3/4, 2", 2 inch cutting depth for each annular drill bit cutter
- CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
- Compatible with mag drills from the following brands - Alfra, BDS, Champion, Dewalt, Euroboor, Evolution, Hougen, Milwaukee, Ruko, Zelcan. Caution - if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack.
- Sturdy aluminum case holding six pieces of 2 inch annular cutter and 2 pilot pins
3
Editor's Choice
Cortool 13500009 Annular Cutters Set 9Pcs 3/4 Inch Weldon Shank 1 Cutting Depth 1/2-1-1/16 Cutting Diameter Two-Flat Hss M2 Slugger Bits
CORTOOLBrand
13500009Model
9.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
FreeShipping
Visit Store » Cortool ( 4.72 / 5 )
Features
- CORTOOL annular cutters set are made with super tough M2 high speed steel for durability, wear resistance, high efficiency and superior use-life.
- Six HSS M2 core drill bit cutters assortment set with outside diameter in US measurement - 1/2", 9/16", 11/16", 13/16", 15/16", 1-1/16", with 1 inch cutting depth for each.
- CORTOOL CNC-machined high precision annular drill bit set with 3/4 inch Weldon shank (double flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes.
- CORTOOL Annular Cutters are compatible with various brands of magnetic drills including Alfra, Dewalt, Hougen, Ruko, Evolution, etc.
- Sturdy & Heavy duty recycable storage case holding 6 annular bits, 1 pilot pin, 1 hex wrench and 1 carbide metal marking pen in each slot.
4
S&F Stead & Fast ZXT-HAZ-003 Annular Cutter Set 13 Pcs
S&F STEAD & FASTBrand
ZXT-HAZ-003Model
3.68 lbWeight
9.3We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
FreeShipping
Visit Store » S&F Merchants ( 4.87 / 5 )
Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- 11 HSS core drill bit cutting tool kit with cutting diameter in inches - 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16", 2 inch cutting depth for each annular drill cutter
- CNC-machined high precision drill bit cutter set with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of magnetic drills including Alfra, BDS, Champion, Dewalt, Evolution, Fein, Euroboor, Hougen, Milwaukee, Ruko. Caution - if you want to use this 2 inch annular cutter on a drill press, you need an extra annular cutter arbor for the 2 inch bit. Arbor is NOT included in this pack
- Sturdy good-looking case holding an assortment of 11 annular bits, 2 pilot pins and a bonus hex wrench
5
Vevor ANNULAR CUTTER 3 Cutter Set, 6 Pcs Weldon Shank Mag Drill Bits
VEVORBrand
Annular Cutter 3Model
2.36H*9.06L*7.09W inchesDimension
1.65 lbWeight
9.3We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $
Save 10% + FreeShipping
Visit Store » Amazon.com ( 4.68 / 5 )
Features
- Premium M2AL High-Speed Steel & High Compatibility - With excellent wear resistance and high-temperature resistance, this annular cutter set has a longer lifespan, enduring the test of time and providing lasting support for your work. Our accessories are compatible with almost all major brands of machinery.
- Innovative Geometric Blade - Our mag drill bits feature unique pointed and flat blades to ensure each blade carries a moderate load, speeding up the cutting process. Say goodbye to chip jams and hello to smoother, faster cutting across various materials.
- Large Capacity Circular Groove - Powerful chip ejection capability ensures smooth chip discharge, preventing jams and increasing efficiency. Our annular bits provide fast drilling speed for smoother operations.
- On-the-Go Convenience - This slugger cutter comes with a carefully designed portable case with a comfortable handle for easy transport anytime, anywhere. The foam design enhances durability, ensuring tool security.
- All-Inclusive Package - This HSS standard kit includes six Weldon shank cutters (1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 2"), a hex wrench, and a 6.34mmx77mm pilot pinch The pilot pins secure workpieces and provide multiple functions like positioning, coolant control, and chip removal, ensuring seamless drilling.
6
Hougen 18002 Copperhead Carbide Annular Cutter Kit 9/16
HOUGENBrand
18002Model
2.0H*8.5L*6.0W inchesDimension
1.0 lbWeight
9.2We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
Save 21%
Visit Store » Weldfabulous ( 4.84 / 5 )
Features
7
Xjx AC02-001 14 Pcs Annular Cutter Set
XJXBrand
AC02-001Model
2.0H*10.82L*7.16W inchesDimension
9.2We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$$
FreeShipping
Visit Store » YOUTOME ( 4.9 / 5 )
Features
- Super Tough HSS Construction - The annular cutter set is made of heat-treated high speed steel (HSS), which has better hardness, toughness, and wear resistance, more durable, prolong the service life.
- Precision Cutting - CNC-machined high-precision annular drill bit set with multiple cutting edges for better chip removal and improved cutting efficiency. Equipped with 3/4-inch Weldon shank with 2 flats for safe and secure clamping. Cuts smoother, burr-free holes than traditional hole saws and twist drill bits.
- Versatile Drill Bit Kit - The metal drill bit set includes 11 HSS core drill bits with outside cutting diameter of 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16 inch. Each drill cuter with a 1-inch cutting depth. It covers a wide range of drilling needs.
- Wide Compatibility - Annular cutters are compatible with various brands of magnetic drills, can also be used with machine tools such as milling machines. Effective for a wide range of materials, such as cast iron, stainless steel, steel materials, copper, and aluminum.
- Convenient Storage and Accessories - This magnetic drill bit set comes in a size-marked case that holds 11 annular bits, 2 pilot pins and 1 hex wrench. Clear dimensions are laser engraved on each bit, ensuring convenient storage and easy access to essential accessories for your drilling tasks.
- Attention Point - - Note that for use on a drill press with the annular cutter, an additional arbor is required, which is not included in this pack.
8
Evolution A-CC6SET-1 Cyclone Premium 1-Inch Annular Cutter Set
EVOLUTIONBrand
A-CC6SET-1Model
3.0H*8.0L*8.0W inchesDimension
1.0 lbWeight
9.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$
Save 26% + FreeShipping
Visit Store » Amazon.com ( 4.68 / 5 )
Features
- Free Pilot Pin Included
- 3/4 inch Weldon shank with 2 flats - fits most standard magnetic drill presses
- Made of M2AL High Speed Steel
9
Oscarbide 13 Pcs 3/4"Weldon Shank 1"Cutting Depth And 7/16 To 1-1/16 Inch Cutting Diameter Mag Drill Bits
OSCARBIDEBrand
13Model
9.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Excellent
Price: $$
FreeShipping
Visit Store » OSCARBDIE ( 4.89 / 5 )
Features
- Annular Cuttes 1 inch cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins
- OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time
- These HSS Slugger Bits ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips,high efficiency and superior service life
- OSCARBIDE annular cutters sets 3/4 inch Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
- These core drill bit cutting tool assortment set are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel
10
Jestuous JES-GBZ-13PCS-2 IN Annular Cutter Set 13 Pcs Jestuous 3/4 Inch Weldon Shank 2 Cutting Depth And Cutting Diameter From 7/16 To 1-1/16
JESTUOUSBrand
JES-GBZ-13PCS-2 INModel
1.0 lbWeight
9.0We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$$
FreeShipping
Visit Store » JESTUOUS ( 4.88 / 5 )
Features
- 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- 2.Made of tough high speed steel material, with longer service life and high heat resistance.
- 3.Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- 5.Includes 11 cutters ( Cutting Diameter - 7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16"), 2'' long cutting depth & 1 plastic tool carrying case.
11
Hougen 11075 Rotacut High Speed Steel Cutter Kit 5/16"
HOUGENBrand
11075Model
0.0H*0.0L*0.0W inchesDimension
0.71 lbWeight
8.8We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
Save 26% + FreeShipping
Visit Store » Tool Town Store ( 4.89 / 5 )
Features
- Hougen Sheet Metal Hole Cutters are Perfect For - Electrical; Pipe and Tubing; Conduit Work; Sheet Metal fabrication; Maintenance Installations; HVAC / PHCC; Automotive Aftermarket and many other industries
- Holemaking faster and easier than with conventional twist drills andhole saws in Sheet Metal; Plate Materials; Hardened Steel, Mild Steel; Stainless Steel and Plastics; For use in hand held drills with either 3/8 inch or 1/2 inch diameter chucks, or air feed drill spindles for production work.
- Hougen Sheet Metal Hole Cutters are not hole saws - theyre precision ground and heat treated high-performance cutting tools that produce clean, burr-free, round holes without ripping, tearing, or deforming the surrounding material. They can produce holes up to 3x faster than hole saws and last 10x longer.
- For use in hand held drills with either 3/8 inch or 1/2 inch diameter chucks, or air feed drill spindles for production work.
- Hougens Sheet Metal Hole Cutters allow you to maximize feed rates and distribute the cutting load evenly over many cutting edges, rather than just two edges as a twist drill. Also, by cutting around the hole, Hougen Sheet Metal Hole Cutters convert a smaller area to chips, leaving the center as a slug, requiring less horsepower and thrust than twist drills.
12
Jestuous JES-TCT-AC-13PCS Annular Cutter Set Carbide Tct 13 Pcs Jestuous 3/4 Inch Weldon Shank 1-3/8 Cutting Depth And Cutting Diameter From 1/2 To 1-1/8 Two Flat Bit
JESTUOUSBrand
JES-TCT-AC-13PCSModel
8.6We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$$
FreeShipping
Visit Store » JESTUOUS ( 4.88 / 5 )
Features
- Carbide TipsTungsten carbide tipped weldon shank annular cutter, 6 carbide tips with silver soldering,the other part are alloy steel,sharper than HSS annular cutters.
- Weldon ShankApplicable to hole cutting and process of annular groove on various magnetic drills and press,can also be used with machine tools such as mills and large drill presses with tool holders.
- You Will GetIncludes 11 cutters ( Cutting Diameter - 1/2",9/16",5/8",11/16",3/4",13/16",7/8",15/16",1",1-1/16",1-1/8"), 2 pilot pins (6.34x90mm,7.98x90mm) & 1 plastic tool carrying case.
- Better PerformanceSelected special-purpose carbide tips with multi-cut geometry for ply-cutting and lower friction,reduced damage of tips and improved performance of chips removal.
- Widely UsageApplicable materials include various steel material, steel plate, stainless steel, aluminum, brass, cast iron, etc.
13
Evolution CC625 5/8-Inch Diameter X 1-Inch Depth Of Cut Cyclone High Speed Steel Annular Cutter
EVOLUTIONBrand
CC625Model
3.0H*4.0L*3.0W inchesDimension
8.5We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
FreeShipping
Visit Store » Amazon.com ( 4.68 / 5 )
Features
14
Accusize Industrial Tools HCS2-0000 Hss Annular Cutter Set
ACCUSIZE INDUSTRIAL TOOLSBrand
HCS2-0000Model
1.97H*6.69L*9.45W inchesDimension
2.2 lbWeight
8.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
Save 25%
Visit Store » Accusize Tools ( 4.83 / 5 )
Features
- 2 inch cutting depth, 3/4 inch weldon shank Annular cutter kit. Includes 6pcs Annular cutter and 2 pcs Pilot pins
- Optimal for steel and iron cutting. Extra information maybe required when cutting other materials, such as stainless steel and aluminum.
- Cutting diameter of each cutter - 7/16", 9/16", 11/16'', 13/16'', 15/16'', 1-1/16''; Pilot pin size - 1/4''x4''
- Cuts holes in steel accurately, quickly & safely; Large holes can be drilled up to ten times faster than regular drills bits; Make overlapping holes, slotting holes and edge cuts;
- Made from tough, high-speed tool steel; Machine finish hole, no reaming needed when used with lubricant; American Standard(ANSI)
- Varied Size Range - Includes cutters in sizes 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'' with a 2'' cutting depth for versatile applications.
- High-Speed Steel Construction - Durable HSS material ensures longevity and superior cutting performance in various metals.
- 3/4 inch Weldon Shank Compatibility - Fits a wide range of magnetic drill presses with standard Weldon shank receptacles for reliable performance.
- Efficient Cutting Design - Annular cutters produce clean, precise holes, reducing machining time compared to traditional twist drills.
- Comprehensive Set - Comes with 8 pieces, including 6 annular cutters and 2 pilot pins, housed in a durable, heavy-duty box for organization and protection.
15
S&F Stead & Fast ZXT-HAZ-018 Annular Cutter 1/2 Inch Diameter X Depth Of Cut 2"
S&F STEAD & FASTBrand
ZXT-HAZ-018Model
3.0H*4.0L*3.0W inchesDimension
0.22 lbWeight
8.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
FreeShipping
Visit Store » S&F Merchants ( 4.87 / 5 )
Features
- Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life
- HSS annular drill bits with Outside Diameter 1/2 inch with 2 inch cutting depth
- CNC-machined high precision drill bit cutter with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results
- Compatible with various brands of mag drill including Alfra, BDS, Dewalt, Fein, Euroboor, Hougen, Ruko. Caution - if you want to use this 2 inch annular cutter on a drill press, you need an extra annular cutter arbor for the 2 inch bit. Arbor is not included in this pack.
- Sturdy plastic case holding one annular cutter, one pilot pin
16
Accusize Industrial Tools HCS1-0000 Hss Professional Annular Cutter Set 1'' Cutting Depth
ACCUSIZE INDUSTRIAL TOOLSBrand
HCS1-0000Model
6.69H*9.45L*1.97W inchesDimension
1.65 lbWeight
8.4We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
Visit Store » Accusize Tools ( 4.83 / 5 )
Features
- 1 inch cutting depth, 8 pc Annular Cutter set; 3/4'' Weldon Shank
- Incudes 2 pcs pilot pins and 6 pcs Annular cutters
- Cutter diameter of each cutter - 7/16'', 9/16'', 11/16'', 13/16'', 15/16'', and 1-1/16'; Pilot Pin Size - 1/4 inch x 3 inch (overall length)
- Cuts holes in steel accurately, quickly & safely; Large holes can be drilled up to ten times faster than regular drills bits; Make overlapping holes, slotting holes and edge cuts; Made from tough, high-speed tool steel
- ; Machine-finish hole-no reaming needed when used with lubricant; American Standard
- Comprehensive Range - Set includes H.S.S. cutters in sizes 7/16", 9/16", 11/16", 13/16", 15/16", and 1-1/16 inch with a 1 inch cutting depth.
- High-Speed Steel Construction - Crafted from durable H.S.S. for longevity and precise cuts in various materials.
- Universal 3/4 inch Weldon Shank - Ensures compatibility with a wide array of magnetic drilling machines and presses.
- Includes Pilot Pins - Comes with 2pcs Pilot Pin Dia. 1/4 inch x 3 inch OAL for accurate hole positioning and drilling.
- Secure Storage - All components are organized in a blue plastic blow mold case for protection and easy transport.
17
Jestuous JES-GBZ-6PCS-2 Annular Cutter Set 6Pcs Jestuous 3/4 Inch Weldon Shank 2 Inches Cutting Depth 1 To 2 Cutting Diameter Two Flat Hss Slugger Bits
JESTUOUSBrand
JES-GBZ-6PCS-2Model
1.0 lbWeight
8.3We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$$
FreeShipping
Visit Store » JESTUOUS ( 4.88 / 5 )
Features
- Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.
- Made of tough high speed steel material, with longer service life and high heat resistance.
- Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
- The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- Includes 6 Cutters ( Cutting Diameter1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 & 2"), 2 pilot pins & 1 plastic tool carrying case.
18
Sali O06GBZ201 Annular Cutter Diameter 1-1/2 Inch
SALIBrand
O06GBZ201Model
8.3We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $
FreeShipping
Visit Store » SALITools ( 4.91 / 5 )
Features
- SizeDiameter 1-1/2cutting depth 2weldon shank 3/4pilot pin1/4*4
- Annular cutters made with super tough m25al high speed steel (hss) for durability, wear resistance, high efficiency and superior service life
- Cnc-machined high precision annular drill bit set with 3/4 inch weldon shank (with 25 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for better results
- Compatible with various brands of magnetic drills including alfra, bds, dewalt, euroboor, hougen, ruko. Caution - If you want to use this annular cutter on a drill press, you need an extra annular cutter arbor for the drill bit cutter. Arbor is not included in this pack
- Sturdy plastic case holding one annular cutter, one pilot pin
19
Yunnergo NE-579032-842790-ER Hss Annular Cutter Set 13Pcs 7/16 Inch To 1-1/16 Inch Cutting Diameter
YUNNERGOBrand
NE-579032-842790-ERModel
8.2We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$
FreeShipping
Visit Store » Yunnergo ( 4.9 / 5 )
Features
- Material - Made of M2AL high speed steel (HSS), compared with ordinary carbon steel drill bit, stronger hardness, higher toughness. The products are heat treated and have a hardness range of HRC 65-67, which allows the drill bit to easily handle higher hardness metal materials with excellent hardness and stability.
- High Temperature Capability - M2Al annular milling cutter maintains its hardness and cutting effectiveness at high temperatures. This high temperature capability makes the bit difficult to anneal when working at high speed and temperature conditions, maintaining a stable cutting ability. This is particularly important in high-intensity and high-speed drilling tasks.
- Cutting Efficiency - Steel hollow drill has a sharp cutting edge and good chip evacuation ability, so that it has a high cutting efficiency in the drilling process. The sharp cutting edge can quickly cut into the material, no burrs, making the hole smooth, and the good chip evacuation ability can quickly clear the chip upward, avoid the chip blockage, and keep the cutting process smooth.
- Strong Versatility - This annular cutter set compatible with many brands of magnetic drill, can also be used for drilling machines, CNC lathes and other equipment cutting, grinding, precision machining and other fields, and suitable for a variety of materials, such as steel, iron, aluminum, copper, plastic, wood, stone and so on. Note - If you want to use this ring knife on a drill press, you will need an additional ring knife shaft to match.
- Product package details - Package 1 (1"drilling depth) - 7/16", 1/2", 9/16", 11/16", 5/8", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", package 2 (2 inch drilling depth) - 7/16", 1/2", 9/16", 11/16", 5/8", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", package 3 (2 inch drilling depth) - 7/8", 1-1/8", 1-1/4", 1-1/2", 2". each package contains 2 pilot pins.
20
Oscarbide AN Nular Cutter Set 13Pieces,2"Cutting Depth,3/4"Weldon Shank And 7/16 To 1-1/16 Inch Cutting Diameter Mag Drill Bits
OSCARBIDEBrand
ANModel
8.1We rank the products based on several factors, like features, price, customer reviews, and so on.
Rating: Very Good
Price: $$$
FreeShipping
Visit Store » OSCARBDIE ( 4.89 / 5 )
Features
- Annular Cutter Kit 2 inch cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins.
- OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time.
- These HSS Slugger Bits ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
- OSCARBIDE annular cutters sets 3/4 inch Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders
- These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel